Author |
Message |
Crazyhorse
Senior Member
Joined: Sun Sep 27, 2009 2:55 pm Posts: 401 Location: Townsville
|
Pathfinder R50 Towbar
Hi, while I appreciate all the assistance I get from forum members normally, I have a question for TJM amd I am willing to wait for the answer. I have a R50 2001 Pathy with a genuine Nissan towbar Part Number C91640W001A which is labeled as rated to 2000KG towing capacity. It does not have a square hitch, it has a tongue attached to the bar with 2 HT bolts. I have always been a little wary of this bar as every other bar I have seen rated this high has a 50MM square hitch. Can I have your advice, reassurance or concerns please?
_________________ Crazy
|
Mon Mar 29, 2010 7:18 pm |
|
|
Dunaruna
Senior Member
Joined: Sat Feb 16, 2008 3:40 pm Posts: 1269 Location: Yarra Valley
|
I have never heard of a class 2 towbar rated at 2000kg, interesting to hear the reply from TJM.
|
Mon Mar 29, 2010 7:43 pm |
|
|
lance
Senior Member
Joined: Mon Dec 17, 2007 9:56 pm Posts: 1181 Location: Melbourne
|
Does it look as though the rivets may have been replaced at some stage ? Doesn't sound right to me either. Did you buy the vehicle with that T/Bar fitted, or did you get it done ?
_________________ [SIGPIC][/SIGPIC] Yellow Maps of Australia Click my name at the top of my posts to send me an email............... ;) The Signs & Decal Caravan http://forum.candm.com.au/album.php?albumid=16
|
Mon Mar 29, 2010 7:45 pm |
|
|
TJM 4WD
Junior Member
Joined: Mon Mar 29, 2010 2:24 pm Posts: 5
|
TJM does not manufacture towbars but Hayman Reese is a major manufacture in the market place .. The OE towbar you have would be manufactured to Nissan specs for the vehicle .. some towbars are rated on chassis ability to support weight .. the 50mm square hitch is a much better form of towbar but can still carry the same rating on some vehicles .. on a 4wd basis the hitch can double for a recovery point with a hitch replacement attachment with a bow shackle attached..
Brad
|
Wed Apr 14, 2010 1:02 pm |
|
|
rooty
Member
Joined: Sun Aug 30, 2009 6:13 pm Posts: 43 Location: Manly, NSW
|
R50 Towbar
Your OE Nissan towbar was made and fitted in Australia. Made possibly by Hayman Reese or another leading towbar manufacturer and most likely fitted at original delivery by a Dealer. Been a Nissan Service Manager for too many years and never yet heard of a problem with that towbar when used correctly and within spec. The later model bars with square hitches are merely the next generation of bar design. Hope that helps.
_________________ Rooty Nissan Navara & Regal RSV
|
Thu Apr 15, 2010 1:37 am |
|
|
Crazyhorse
Senior Member
Joined: Sun Sep 27, 2009 2:55 pm Posts: 401 Location: Townsville
|
Thanks Brad & Rooty
Thanks guys...this has worried me for years and Nissan always said "of course its fine" - but they would... wouldn't they? H/R guy at a caravan show last year said no way, and no way we can fit our load levelling bars...reckoned the bar must be only rated 500KG The information from you guys has helped a lot, and I appreciate it (and take back my old man grizzle about no response with an abject apology Brad)
_________________ Crazy
|
Thu Apr 15, 2010 5:03 pm |
|
|