Hi. A Tekonsha P3 seems to be a highly regarded brake controller. I've just bought a Landcruiser 200 but can't figure out where I would have it fitted. Could you give me some feedback on the best spot or where other people have them fitted. Thanks in anticipation.
Mon Nov 08, 2010 10:10 am
Dunaruna
Senior Member
Joined: Sat Feb 16, 2008 3:40 pm Posts: 1269 Location: Yarra Valley
Re: Fitting a Tekonsha P3 in a Landcruiser 200
The ashtray area is probably the best. All the wiring is hidden and you are nowhere near the knee airbag area.
I have fitted a few to the righthand side of the knee airbag but it is a bit tricky to run the wiring loom in a safe place so that it will not foul the airbag.
Mon Nov 08, 2010 4:56 pm
JFM
Junior Member
Joined: Fri Jan 25, 2008 1:30 pm Posts: 2
Re: Fitting a Tekonsha P3 in a Landcruiser 200
Hi Dunaruna. I hadn't thought of the ashtray. I went out and had look, pulled out the ashtray - great idea. Many thanks
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum