Fitting a Tekonsha P3 in a Landcruiser 200
-
- Posts: 2
- Joined: Fri Jan 25, 2008 1:30 pm
Fitting a Tekonsha P3 in a Landcruiser 200
Hi. A Tekonsha P3 seems to be a highly regarded brake controller. I've just bought a Landcruiser 200 but can't figure out where I would have it fitted. Could you give me some feedback on the best spot or where other people have them fitted. Thanks in anticipation.
- Dunaruna
- Posts: 1507
- Joined: Sat Feb 16, 2008 3:40 pm
- Location: Yarra Valley, Victoria, Australia
Re: Fitting a Tekonsha P3 in a Landcruiser 200
The ashtray area is probably the best. All the wiring is hidden and you are nowhere near the knee airbag area.
I have fitted a few to the righthand side of the knee airbag but it is a bit tricky to run the wiring loom in a safe place so that it will not foul the airbag.
I have fitted a few to the righthand side of the knee airbag but it is a bit tricky to run the wiring loom in a safe place so that it will not foul the airbag.
-
- Posts: 2
- Joined: Fri Jan 25, 2008 1:30 pm
Re: Fitting a Tekonsha P3 in a Landcruiser 200
Hi Dunaruna. I hadn't thought of the ashtray. I went out and had look, pulled out the ashtray - great idea. Many thanks